It does now.
The 1-/4 inch hitch aligner is part # e58ZR. It's just like the 2 inch version, part # e98942, except for 1-1/4 inch hitches. view full answer...
I have just what you need to extend the cable on the Hopkins Smart Hitch Backup Camera and Hitch Aligner System part # HM50002, the part # HM3100504060 for 5' long or the part # HM3100504061 for 25' long. view full answer...
For quick setup back up camera to use for hitch alignment the Swift Hitch Wireless Hitch Alignment Camera and Monitor # 04928 is a great option. It mounts on your 2006 Dodge Ram 3500 magnetically and connects wirelessly to the hand held monitor. Both the camera and monitor use 4-hour rechargable batteries and can be charged simultaneously using the included 12-volt DC charger. The camera also has built in infrared lights for night vision.
For a more permenant option, the Hopkins Smart... view full answer...
The camera angle of the K-Source Vision System Backup Camera # KSVS-8 that you referenced can be pointed pretty far down but it really depends on the location of the license plate relative to the hitch, if there's a portion of the bumper that would get in the way, and the length of your ball mount etc. If you check out the picture I attached you can see the camera pointed down pretty far which would capture the hitch ball on the monitor but it looks like the step bumper would interfere.... view full answer...
The hitch alignment and back-up camera I highly recommend for your 2006 GMC Sierra 2500HD is the Hopkins Smart Hitch Backup Camera and Hitch Aligner System # HM50002.
This system uses a camera that can be switched from Hitch Mode to Everyday Mode, uses sensors to alert you to any potential issues, plugs into your 7-way, and uses a 3.5" color monitor. Th Hopkins Smart Hitch Camera is almost universally loved by the customers who have used it, with over 400 giving it a rating very close... view full answer...
We have designed different products to solve a specific problem, but not all at once. For all your attachments that do not have a threaded hitch pin hole, we use this anti rattle device # e99007. This is great for the two inch hitch accessories that come with just a hitch pin. If you have one of our products like one of our etrailer cargo carriers # e98874 you can use our LOCKING anti rattle bolt # e99047. Our carriers come with anti rattle bolts, but this one allows you to lock it to your... view full answer...
Yes, the Andersen Ultimate Connection 5th Wheel Trailer Hitch System # AM3200 does come the alignment ring. I attached a picture that shows it as well. view full answer...
In order to use the Easy-Hitch Light-Up, Telescoping Hitch Aligner part # JE00600 with either your Weigh Safe Aluminum Ball Mount or Rapid Hitch Aluminum Ball Mount you will need to either place the aligner directly atop the hitch ball or on the receiver tube between the bumper and ball mount (see photo). The aligner however will not be able to be attached to the shank because it has a magnetic base that will not work with aluminum.
If the above will not work for you then your only other... view full answer...
The Hopkins Smart Hitch Backup Camera and Hitch Aligner System # HM50002 certainly can be used with a gooseneck trailer hitch, though you would need to mount the camera, which has a license plate frame, in the bed of your truck. A better option for you would be the Swift Hitch Wireless Hitch Alignment Camera and Monitor # 04928.
This is a portable camera that you can mount wherever you like, has a 55 degree viewing angle and is mounted with a magnet. It is wireless and transmits via radio... view full answer...
The Hopkins Smart Hitch Backup Camera and Hitch Aligner System part # HM50002 is what I recommend for adding a backup camera and hitch aligner to a Ford F-150. This is a great system because the camera attaches to the license plate so there's no drilling to install the camera or finding a spot for mounting. It's a wired system so there won't be any connection issues, especially if you have a newer style with aluminum body. The signal is then sent into the cab where you have a nice color... view full answer...
Yes, the Hopkins Smart Hitch Backup Camera and Hitch Aligner System # HM50002 that you referenced is a fit for your 1994 Dodge Ram 1500 that has a 7-way installed on it. view full answer...
It's not a great idea to go with a thinner hitch lock but we have the collar hitch aligner part # e98942 which would help you get the exact same alignment everytime so that you can keep using your current hitch lock. view full answer...
The blue screen error that you mentioned on the Hopkins Smart Hitch Backup Camera and Hitch Aligner System part # HM50002 is a non-repairable fault, the unit will need to be replaced. There are no replacement parts for this system either. For replacement, you are welcome to just obtain another one if you were happy with it but now might be a good time to upgrade to a better system, the Rear View Safety Backup Camera System part # RVS-778718N. This system can be used as both a backup camera... view full answer...
Thanks for the picture of your truck and trailer. Based on that I can tell that the Swift Hitch Digital Wireless Hitch Alignment Camera and Monitor # SH02DIGITAL that you referenced would easily work. This camera has an uninterrupted range of up to 300 feet so for your shorter in length trailer it would easily work well. Unlike other wireless cameras the Swift Hitch camera setups have a great reputation for signal strength as well. view full answer...
I would be happy to help!
I had our warehouse measure the Draw-Tite Trailer Hitch Receiver # 76116 you were looking at and it measures 4-7/8" from the center of the hitch pin hole to the back of the receiver as shown in the included diagram.
For a hitch pin alignment collar you will need the either the 2" # e98942 or the 1-1/4" # e58ZR.
I included videos of the products mentioned for you to take a look at. view full answer...
I do have options for you but there is not a cargo light camera kit offered for a 2012 Chevrolet Silverado 3500. Instead, you will want to use a wireless hitch alignment camera kit. I recommend the Swift Hitch Digital Wireless Hitch Alignment Camera and Monitor part # SH02Digital or the Rear View Safety Wireless Hitch Camera part # RVS-83112. These cameras both have magnetic mounts so you could place them on the roof of your cab. The Swift Hitch Digital also comes with a suction cup mount... view full answer...
You could go with something like the Swift Hitch Trailer Hitch Aligner Portable Wireless Camera System with Night Vision # 04928 which has more maneuverability and you can point it directly at your trailer ball. The down side is that this unit uses rechargeable batteries and sticks out considering its size and color. view full answer...
To get the wireless camera similar to the # SH04 along with a monitor, you will want the Swift Hitch Wireless Hitch Alignment Camera and Monitor - Night Vision - 4-Hour Camera Battery # 04928. This is the only separate monitor that will work with the Swift Hitch camera unless you use the smartphone or tablet app. The monitor is not currently available separately.
You may also be interested in the Storage Case for the Swift Hitch Wireless Camera System # PC02 which is a nice way to store... view full answer...
When aligning the axles on your Trailstar Trailer, I recommend aligning them so that they are square to the trailer's frame. Doing this will maintain the load capacity and structural integrity of the trailer itself. If you were to instead align the trailer to the tongue, it would shift the load bearing components of the trailer off-center, essentially reducing it to an unknown capacity. This may have an effect on other components as well, such as the suspension and wheels.
The only drawback... view full answer...
I have the etrailer Hitch Pin Alignment Collar # e98942 and while it works great for me I could see it potentially causing an issue with RockTamers like part # ERT00108 if the shank of the ball mount you were using was shorter. If the shank was longer and had plenty of clearance it wouldn't be an issue. This would take up right at 1 inch of the shank length which the Rock Tamers require an inch of clearance as well. view full answer...